Shure PGXD14/BETA98H Digital Wireless System with Beta 98H/C Mic

Sku #H68493000000000

45 day price guarantee, 45 day return policy, 100% secure shopping

$549.00 Finance Now!

In Stock & Ready To Ship

Platinum Coverage: (What’s This?) most popular
Add to list
See All Shure Combo Wireless Systems
Shure

Mic-up horns and percussion instruments with this convenient, quality wireless mic system.

The PGXD14/Beta98H Digital Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the Beta 98H/C, a precision-engineered miniature cardioid condenser microphone with integrated clip and gooseneck for horn applications, as well as a PGXD1 bodypack transmitter, and a PGXD4 receiver.

The Beta 98H/C is a premium cardioid condenser instrument microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shockmount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

The rugged PGXD1 bodypack transmitter easily clips onto a belt or guitar strap, and provides you with a 20Hz - 20kHz frequency range, up to 10 hours of continuous use on 2 standard AA batteries (not included), and 200' of wireless freedom.

The PGXD4 receiver offers 24-bit/48kHz accurate sound, offers technology for incredibly accurate sound, auto frequency selection, and greater reliability thanks to its true digital diversity.

Features
  • PGXD1 Transmitter with WA302 Instrument Cable
  • Rugged, compact bodypack with belt clip and instrument cable
  • 20Hz - 20kHz frequency range captures every nuance of your tone
  • Power, mute, and battery status LED
  • Up to 10 hours of continuous use from 2 AA batteries
  • 200' (60m) operating range
  • 26dB of continuously adjustable gain to match variable input levels
  • PGXD4 Wireless Receiver
  • 24-bit / 48kHz digital technology for incredibly accurate sound
  • Automatic frequency selection locates a clear channel instantly
  • One-touch sync automatically syncs the transmitter and receiver
  • True digital diversity delivers rock-solid wireless signal reliability
  • Up to 5 systems can be used at once
  • 1„4" and XLR audio outputs
  • Included padded carrying case for portability and protection
  • Beta 98H/C
  • 1.6m hard-wried cable
  • Tailored frequency response for open, natural sound reproduction
  • Compact, lightweight construction provides a low degree of visibility
  • Interchangeable microphone cartridges are available:
  • RPM108 - Cardioid cartridge
 

PGXD14/BETA98H Digital Wireless System with Beta 98H/C Mic Specifications:

  • PGXD1 transmitter/strong>
    Audio input level: +10 dBV maximum, at minimum gain setting -16 dBV maximum, at maximum gain
    Gain adjustment range: 26dB
    Input impedance: 1MÎ
    RF Output Level: 10 mW maximum (dependent on applicable country regulations)
    Dimensions (HxWxD): 108mm x 64mm x 19mm (4.25" x 2.50" x 0.75")
    Weight: 128g (4.5oz.) without batteries
    Housing: Molded polycarbonate case
    Power requirements:
    Battery Life: Up to 10 hours

    PGXD4 receiver
    Dimensions (HxWxD): 40mm x 181mm x 104mm (1.6" x 7.125" x 4.1")
    Weight: 289g (10.2oz.)
    Housing: ABS
    Audio Output Level (ref. ±38kHz deviation, 1kHz tone): XLR connector (into 3000Î load): -2.5dBV 1/4" connector (into 10000Î load): +10 dBV
    Impedance:
    XLR: 50Î
    1/4": 50Î
    Sensitivity: -102 dBm @ 10-5 BER
    Image rejection: > 70dB, typical
    XLR output:
    Impedance balanced Pin 1: Ground (cable shield)
    Pin 2: Audio
    Pin 3: No Audio
    Audio LED:
    Red: 2dB below clip
    Amber: 12dB below clip
    Green: 50dB below clip
    Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply
    Pin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4") TRS: Tip = audio, Ring = no audio, Sleeve = ground

    Beta 98H/C
    Type: Condenser (electret bias)
    Frequency response: 20 to 20,000Hz
    Polar pattern: Unidirectional (cardioid)
    Output impedance: Rated at 150Î (actual)
    Recommended minimum load impedance: 1 kÎ (May be used with loads as low as 150Î with reduced clipping level
    Output Level (0 dB = 1 volt per Pascal):
    Open Circuit Voltage: -56dB (1.6mV)
    Output Clipping Level (at 1kHz, THD < 1%):
    2.5kÎ load: 11dBV (3.5V)
    1.0kÎ load: 3dBV (1.4 V)
    Maximum SPL:
    2.5kÎ: 163dB
    1.0kÎ load: 155dB
    Dynamic Range (maximum SPL to A-weighted noise level): 132dB (2.5kÎ load)
    Signal-to-noise ratio: 63dB at 94dB SPL (IEC 651)
    Polarity:
    Positive pressure on microphone diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output connector
    Recommended Operating Voltage: 11 to 52 Vdc Phantom
    Environmental conditions: Operating temperatures: -7 C to 49 C (20 F to 120 F)
    Storage temperatures: 29 C to +74 C (-20 F to 165 F)
    Relative Humidity: 0 to 95%
    Net Weight: Microphone w/cable and preamplifier: 156g (5.5oz.)
review resources
Loading....
write a review