TC Electronic BH500 500W Bass Amp Head
Hybrid Bass Amplifier Heads
- Write a Review
45 day price guarantee, 45 day return policy, 100% secure shopping
Tons of power with a feature set that leaves little to be desired.
The BH500 bass amp head is the latest addition to TC Electronic's Bass Amp 2.0 lineup! Combined with the BC cabs of your choice, it stacks up to become any rig you need for small bar gigs, indoor rock clubs, outdoor stadium concerts—you name it!
The BH500 boasts razor-sharp tone-shaping tools like TubeTone™ emulator for tube-like sound and response, SpectraComp™ compression, and bass-tuned tone controls. Also, its three user memories let you change your tone at any given time. An integrated tuner lets you tune up in silence before you rock.
A conventional compressor is often dominated by the lower string, but with SpectraComp you get per-string multi-band compression that evens out across all strings. You get an even, rock-solid tone that cuts through any mix whether you play fingerstyle, with a heavy pick, or slap the strings hard.
The TubeTone™ effect was originally introduced on RH450. Most transistor designs try to replicate tube sound using one small preamp tube, but why not take the crucial characteristics of a full preamp and power amp into account? Both are essential to the sound when you want that classic tube warmth as well as when you go for a full-on overdriven rock sound with a massive punch!
BH500 can store three of your favorite tones. For instance, if you need a nice chunk of overdrive on specific passages, presets are king. Not to mention, with great sounding bass tones and seamless switching between them, you will be able to focus on the important thing, rocking out!
Built-in bass tuner
Every once in a while you need to tune up, and whenever that happens, just let the built-in tuner guide you. It's simple, it lets you tune silently, and it gets you back to rocking in no time.
Tone Controls and TweeterTone
EQ is always a bass essential, so the BH500 is equipped with a great-sounding 4-band EQ which is perfect for shaping your fundamental tone. Further, with two contour filters you can scoop the mid frequencies, which creates an amazing low-end punch on demand.
The tweeter control is usually located on the rear of the cabinet, but on the BH500 you can conveniently adjust the tweeter level right from the front panel. Further, the sound also gets modified slightly with filters giving you a much more intelligent control over the high frequencies that are critical for giving your sound that razor-sharp edge.
For rehearsing or jamming, you can connect your portable music player to the front-panel aux input. If you don't want to disturb the neighbors, plug in your headphones and the drivers will be muted automatically. Finally, you can send a signal to a sound engineer via the balanced XLR output (also on the front panel), or to an audio interface when you are recording.
- 4-band tone controls
- TubeTone™ tube emulation
- SpectraComp™ per-string compression
- Front-panel tweeter level control, balanced XLR out, and RCA aux in
- 3 user preset slots
It's time to step up to Bass 2.0 with the BH500! Order now.