Peavey KB 5 150W 2x10 4-Channel Keyboard Amp

Sku #703370000000000

45 day price guarantee, 45 day return policy, 100% secure shopping

$599.99 Finance Now!

Order Now! Expected to ship 10/10/16

Restrictions Apply (Details)

Platinum Coverage: (What’s This?)
Add to list
See All Peavey Keyboard Amplifiers & Monitors
Peavey

Peavey continues its commitment to smart keyboard amplification.

The KB 5 was designed as a personal PA system in a keyboard amp. The KB 5 features separate inputs on each channel and can easily handle voice, microphones and other instruments, including acoustic and electric guitars, drum machines and backing machines, such as CD and DAT players. Other essential features include stereo effects loop, ground lift, master level, XLR balanced stereo line out, DDT defeat switch and the capability to drive an external speaker.

Features
  • 150 watts/200 watts with external speaker
  • Stereo mixer with 2-band EQ and main effects send/return
  • Mic/line channel with 3-band EQ and effects send/return
  • Monitor input with level control and assign
  • Headphone out with level control
  • Built-in casters and handle for easy moving
  • Two 10 inch speakers and horn
  • Weight Unpacked: 85.80 lb(38.918 kg)
  • Weight Packed: 96.00 lb(43.545 kg)
  • Width Packed: 21.25"(53.975 cm)
  • Height Packed: 28.25"(71.755 cm)

Order today and cover the stage without dragging a mountain of gear.

 

KB 5 150W 2x10 4-Channel Keyboard Amp Specifications:

  • PREAMP SECTION
    The following preamp specs are
    measured @ 1 kHz nominal signal
    levels are with channel level controls
    set at 5 minimum levels are with
    channel level controls set at 10.

    Channel 1 2 and 3 inputs:
    Input Impedance: 100K Left/Mono
    Nominal Input Level: -22 dBV 79 mV RMS
    Minimum Input Level: -40 dBV 10 mV RMS
    Nominal Input Level: -15 dBV 178 mV RMS
    Minimum Input Level: -33 dBV 22 mV RMS

    Channel 4 input:
    Low Z Input Impedance: 5 k Ohms
    Nominal Input Level: -28 dBV 40 mV RMS
    Minimum Input Level: -48 dBV 4 mV RMS
    High Z Input Impedance: 100 l Left
    Nominal Input Level: -5 dBV 560 mV RMS
    Minimum Input Level: -22 dBV 79 mV RMS
    Right: -1 dBV 1.1 V RMS
    Minimum: -16 dBV 158 mV RMS

    Headphone output
    Load Impedance: 8 Ohms or greater
    Nominal Output: 100 mW RMS

    Main line out
    Output Impedance: <100
    Output Level: 18 dBV

    POWER AMPLIFIER SECTION
    Rated power and load:
    200 Watts RMS/4 Ohms or 150 Watts
    RMS/8 Ohms with DDT off
    (1 kHz, 1% THD @ 120 VAC line)

    Frequency response:
    +0, -1dB, 20Hz-20kHz @ 100 Watts RMS/
    8 Ohms

    Total harmonic distortion:
    Less than 0.01% @ 1 kHz/8 Ohms
    Typically less than 0.08% 20 Hz-20kHz
    DDT dynamic range:
    Greater than 20 dB
    DDT maximum THD:
    Below 0.5% THD for 6 dB overload
    Below 1% THD for 20 dB overload

    Hum and noise:
    Greater than 100 dB below rated power

    Power consumption:
    300 Watts @ 120V AC 50/60 Hz domestic
    300 Watts @ 220-230/240V AC 60 Hz export
review resources
Loading....