Line 6 ToneCore Liqua Flange Guitar Effects PedalProduct #150398 Line 6 150398 HBAF Modulation, Chorus, Flanging, Phasing & Tremolo Effects Pedals https://www.esnapw.com/rses/ESnapServlet?MerchantNumberSent=63655
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
- Buy New
This product has been discontinued but may be available as a used item.
The ToneCore Liqua-Flange may be the most comprehensive flanger yet!
The ToneCore Liqua-Flange guitar effects pedals features selectable Digital, Liquid, and Analog models--all with pass through zero flanging--that give you more flanging options than you though possible. Add to that selectable negative/positive polarity; 11 selectable waveforms; Time, Speed, Feedback, and Depth controls; and tap tempo capability and you've got a flanger like no other. Liqua-Flange has stereo ins/outs, and can be powered by a 9V battery or the optional Line 6 DC-1 power supply.
ToneCore pedals consist of a ToneDock base--in stereo or mono--and interchangeable effects modules that snap in and out, allowing you to change effects without rearranging your pedalboard. The ToneDock is powered by a 9V battery or optional DC-1 adapter.
- Digital, Liquid, Analog models with pass through zero flanging
- Selective negative/positive polarity
- 11 selectable waveforms
- Time, Speed, Feedback, Depth controls
- Tap tempo
From classic studio flange sounds to unheard wonders, the Liqua-Flange delivers. Call or click to order now!
ToneCore Liqua Flange Guitar Effects Pedal Specifications:
- Analog: The wet signal has the frequency response of classic analog devices.
- Chorus: Uses a triangle modulation waveform with an extended offset and range to produce a chorus effect.
- Depth: 5.625"
- Depth Knob: Controls how widely the delay line will be modulated.
- Digital: The wet signal has a flat frequency response.
- Envelope Down: This modulation source uses an envelope follower to track the amplitude variations of the input signal and produce a control signal that modulates the flanger"s delay time.
- Envelope Up: An inverted version of Envelope Down.
- Feedback Knob: Increases the amount of the wet signal fed back into the input of the effect. Increasing feedback (clockwise rotation) will increase the intensity of the flange.
- Height: 2.875"
- Liquid: Has dual delay lines with the modulation offset from each other.
- Polarity Switch: Allows you to select Negative or Positive phase for the delay line. When summed together with the original signal, changing the phase can result in some very dramatic effects.
- Random : Same as Step but with a smoothing filter applied to the output of the LFO, producing smooth value changes with each LFO cycle.
- Range Knob: Range knob tells the filter how far up or down the frequency spectrum you want the filter to travel. Low range settings will accentuate lower frequencies; increased range will accentuate higher frequencies.
- Saw Down: This wave has a shape that resembles the teeth on the blade of a saw. Within one cycle this wave falls linearly, then immediately rises to it"s starting point.
- Saw Up: This is an inverted version of Saw Down where the wave has a smooth linear rise and an immediate drop at the end of its cycle.
- Sine: Uses a sinusoidal waveform as the modulation source.
- Speed Knob: Controls the rate at which the delay line"s time is modulated. Turning the speed control fully counter clockwise to the OFF position stops the modulation of the delay line completely.
- Step: Uses a modulation waveform produced by a random value generator where each cycle of the LFO produces a different modulation level.
- Tap Tempo: Using the innovative ToneCore double-action footswitch, you can tap a couple times and have the flanging pulsations match your tempo. Whether the effect is active or bypassed, you can tap the footswitch lightly to set your tempo. Your first two taps estab
- Time Knob: Controls the amount the delay line is delayed as compared to the original signal. The fully counter clockwise position, labeled ZERO, indicates the time difference between the delay line and the original signal is zero. At this point the two signals are s
- Trigger Down: Same as Trigger Up but with a falling envelope.
- Trigger Up : Uses a modulation source derived from attack detection DSP, this in turn triggers an envelope that rises linearly. The rise time is determined by the speed knob.
- Vintage: Based on* the unique waveform of the classic MXR flanger.
- Wave Select Knob: Select from 11 amazing waveforms that get you everywhere from classic stompbox to modern studio and beyond.
- Weight: 2lbs 4oz
- Width: 3.375"
- Type: Flanger