Lehle P-Split Splitter Guitar PedalSku #150527000000000 Lehle 150527 HBAI Router & Signal Path Effects Pedals https://www.esnapw.com/rses/ESnapServlet?MerchantNumberSent=63655
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
Gold plated switches and no ground loops.
P-Split stands for "passive splitting" with maximum signal fidelity. With the Lehle guitar pedal, one instrument can be routed to two amplifiers simultaneously. Output A is electrically isolated from Output B by the Lehle LTHZ high end transformer — so ground loops are excluded from the start. In addition, the Lehle P-Split also features a gold-plated-contact phase-reversing and ground switch.
The Lehle LTHZ is a ferrite core transformer consisting of two coils with very high inductivity with minimal scatter. It is ideal for the galvanic isolation of high-impedance signals.
1 The input signal should be fed into this jack. The Lehle P-Split operates purely passively. The input signal remains continuously connected to outputs A and B with no semiconductors or any other active component in the signal path.
2 The input signal and its ground are directly present on jack B.
3 This switch can be used to rotate the phase of the input signal on output A through 180°. Shifting the phase may help if phase cancellations have a negative effect on signal reproduction.
4 Pressing this switch connects the grounds of outputs A and B.
5 The input signal is present on jack A, electrically isolated by the Lehle LTHZ (7) high-end transformer.6 The base of the Lehle P-Split can be secured without difficulty. First remove the four housing screws for the cover, and then screw the base of the switch to a base-plate using the two screws supplied with the unit, the washers and the spacer elements.
7 The Lehle LTHZ is a ferrite core transformer consisting of two coils with very high inductivity with minimal scatter. It is ideal for the galvanic isolation of high-impedance signals.
- Gold-plated switches
- Lehle LTHZ transformer
Smile when you split. Call or click today to order.
P-Split Splitter Guitar Pedal Specifications:
- Weight: 420 g
- Length: 3.5"
- Width: 3.6"
- Overall Height: 1.5"
- max. Level: +20 dBU
- THD: <0,4 % @ +20 dBU/ 40 Hz
- Fequencyresp.: 30 Hz - 20 kHz -0,3/ +0,8 dB (Source 600 Ohm, Loud 1MOhm
Reviewed by 1 customer
Displaying review 1
Comments about Lehle P-Split Splitter Guitar Pedal:
Although the thing works, the gain is reduced too much for any good guitar input signal. This box totally takes out the harmonics and good things the pick-ups on the guitar generate. I sent it back. It may however work with a clean power amp.