Ashdown EB-Lite 12-220 EVO III Bass Combo AmpProduct #H87397 Ashdown H87397 HABDB Solid State Combo Bass Amplifiers https://www.esnapw.com/rses/ESnapServlet?MerchantNumberSent=63655
- Write a Review
- Seen a Lower Price? Click Here.
45 day price guarantee, 45 day return policy, 100% secure shopping
- Buy New
This product has been discontinued but may be available as a Open Box item.
An affordable high performance 1x12" combo that's true to the legendary sound of Ashdown.
Ashdown Electric Blue bass amplification loads legendary Ashdown tone into an affordable pair of high-performance, high-value combos.
The EB LITE 12-220 1 x 12" combo uses a 220 Watts RMS fan-cooled fast-transient power stage, and a fully-featured bass pre amp with inputs for both active and passive instruments, an illuminated VU meter, 5 band EQ with Bright and Deep switches for total tonal control, a front panel-mounted balanced DI output for connection to a PA or recording console, an FX loop, a tuner/line output and the classic Ashdown sub-harmonic generator.
Consistent with its EVO III status, the combo also includes a built-in compressor to provide an exceptional level of sonic control for a bass amp of this size and cost.
A high-performance Ashdown 'Blueline' speaker ensures exceptional attack, clarity and low-end performance, while an extension speaker output can be used to connect an additional cabinet for use in larger venues. The cabinet is finished in a tough, retro-style vinyl covering with metal protected corners.
- 220W Power output
- 230 /115v Power requirement
- 1 - 12" BlueLine speaker
- -3dB at 33Hz and 25KHz Frequency response
- 2 x Jack Outputs
- 8 ohm
Fill the air with Ashdown. Order today!
EB-Lite 12-220 EVO III Bass Combo Amp Specifications:
- High Instrument Input: Impedance 3.9MOhms / Input range 150mV - 20V p-p
Low Instrument Input: Impedance 10KOhms / Input range 300mV - 40V p-p
Line Input: Impedance 22k Ohms / Input level 0dBu nominal
DI Output: 600 Ohms balanced / Level -20dBu nominal
Tuner Output: Impedance 22k Ohms, level 0dBu nominal
Signal to noise Better than 80dB (EQ flat)
EQ: Bass +/-15dB @ 100Hz
Lo Mid +/-15dB @ 220Hz
Middle +/-15dB @ 660Hz
Hi Mid +/-15dB @ 1.6kHz
Treble +/-15dB @ 7kHz shelving
Deep +8dB @ 50Hz
Bright +10dB @ 10kHz
Effects Send: Impedance 22k Ohms / Level 0dBu nominal
Effects Return: Impedance 22k Ohms / Level 0dBu nominal
Distortion: Less than 0.5% THD
Dimensions (W x H x D): 18.7" x 19.7" x 11.8"
Weight: 50.7 lb.