Sonic accuracy at high SPL levels.
The JBL 2206H low frequency transducer incorporates JBL's patented Vented Gap Cooling technology in an improved Symmetrical Field Geometry (SFG) magnetic structure. To increase power handling while reducing power compression, JBL engineers have created a unique, direct voice coil-to-air heat dissipation method called Vented Gap Cooling. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature - a direct improvement in power compression.
Through the use of new computer-aided magnet optimization and analysis techniques, JBL engineers were able to optimize both magnet weight, flux density and field saturation resulting in a 1.8 kg (3.9 lb) reduction in overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost.
- Advanced LSR Linear Spatial
- Reference design provides neutral off-axis response for greater clarity
The name pros have learned to lean on. Prop up your mix with the JBL 2206H 12" Low Frequency Transducer.
2206H 12" Low Frequency Transducer Specifications:
- 12" diameter
- Power capacity: 600W continuous pink noise @ 8 ohms
- Sensitivity: 95 dB SPL
- Frequency Range: 45Hz 3.5 kHz
- Power compression:
- at -10dB (60W) - 0.6 dB
- at - 3dB (300W) - 2.4 dB
- at full power (600W) - 3.9 dB
- 2nd harmonic: < 1.0%
- 3rd harmonic: < 1.0%
- Highest recommended crossover: 1500 Hz
- Voice coil diameter: 4"