Eminence Legend 1218 12" Guitar Speaker

Sku #660090000000000

45 day price guarantee, 45 day return policy, 100% secure shopping

$94.99

MSRP: $99.99   You Save: $5.00 (5%)

In Stock & Ready To Ship

Restrictions Apply (Details)

Add to list
See All Eminence Speakers for Instrument Amps
Eminence

American tone with hint of Brit.

The Eminence Legend 1218 12" Guitar Speaker delivers warm, smooth and fat American tone with a hint of smooth British break-up. Its coloration favors country, blues and jazz.

Eminence recommends the Legend 1218 as a direct replacement in the Fender Twin combo Amp.

Features

  • Warm, smooth, and fat
  • Perfect for country, blues, and jazz
  • Voice Coil Diameter: 2", 50.8mm
  • Magnet Weight: 38 oz.
  • Power Rating.: 150W
  • Sensitivity: 98.8

Put it in the cart and make your amp sound better than it ever has.

 

Legend 1218 12" Guitar Speaker Specifications:

  • Nominal Basket Diameter: 12", 304.8mm
  • Nominal Impedance: 8 ohms
  • Power Rating
  • Watts: 150W:
  • Resonance: 100Hz
  • Usable Frequency Range: 80Hz-4.2kHz
  • Sensitivity: 98.8
  • Magnet Weight: 38 oz.
  • Gap Height: 0.312", 7.92mm
  • Voice Coil Diameter: 2", 50.8mm
  • THIELE & SMALL PARAMETERS
  • Resonant Frequency (fs): 100Hz:
  • DC Resistance (Re): 6.95
  • Coil Inductance (Le): 0.69mH
  • Mechanical Q (Qms): 15.51
  • Electromagnetic Q (Qes): 0.95
  • Total Q (Qts): 0.89
  • Compliance Equivalent Volume (Vas): 31.2 liters / 1.1 cu. ft.
  • Peak Diaphragm Displacement Volume (Vd): 41cc
  • Mechanical Compliance of Suspension (Cms): 0.09mm/N
  • BL Product (BL): 11.6 T-M
  • Diaphram Mass inc. Airload (Mms): 29 grams
  • Efficiency Bandwidth Product (EBP): 105
  • Maximum Linear Excursion (Xmax): 0.8mm
  • Surface Area of Cone (Sd): 506.7 cm2
  • MOUNTING INFORMATION
  • Recommended Enclosure: Vented
  • Overall Diameter: 12.03", 305.5mm
  • Baffle Hole Diameter: 10.95", 278.1mm
  • Front Sealing Gasket: fitted as standard
  • Rear Sealing Gasket: fitted as standard
  • Mounting Holes Diameter: 0.25", 6.4mm
  • Mounting Holes B.C. D.: 11.59", 294.3mm
  • Depth: 4.5", 114mm
  • Net Weight: 8.4 lbs., 3.8 kg
  • Shipping Weight: 10.6 lbs., 4.8 kg
  • MATERIALS OF CONSTRUCTION
  • Coil Construction: Copper voice coil
  • Coil Former: Nomex former
  • Magnet Composition: Ferrite magnet
  • Core Details: Non-vented core
  • Basket Materials: Pressed steel basket
  • Cone Composition: Paper Cone
  • Cone Edge Composition: Paper cone edge
  • Dustcap Composition: Zurette dust cap
  • FOOTNOTES
  • *
  • Please consult www.eminence.com for specifications of models with alternative impedances.
  • ** Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
  • *** The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms. Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance " LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle " 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction " Hafler P1500 Trans-Nova amplifier " 2700 cu.ft. chamber with fiberglass on all six surfaces (three with custom-made wedges).
  • **** BETA 8CX, 10CX, 12CX and ACOUSTINATOR™ CX2008 are coaxial speakers with tweeter sold separately. Published Usable Frequency response contingent upon use of APT 50 HF Driver.
review resources
Loading....
write a review