Celestion G10 Gold 40W, 10" Alnico Guitar SpeakerProduct #583007 Celestion 583007 LMGC Speakers for Instrument Amps https://www.esnapw.com/rses/ESnapServlet?MerchantNumberSent=63655
- Write a Review
- Seen a Lower Price? Click Here.
FREE SHIPPING on Almost Everything
Go for the gold.
Following tremendous feedback received for the Gold 12", Celestion realized there was also a need for a guitar speaker that conveyed the Alnico mellowness of the original Blue, with the speed and response of a 10" driver.
The 40W Celestion G10 Alnico Gold guitar speaker is the ultimate 10" speaker, blending unmistakable Alnico class with a rich low-end, creamy midrange and vintage chiming top-end. Springy, warm, revealing, and highly expressive, the 40W Celestion speaker can be used singly or in pairs to add a classy sheen to any amp, or in a 4x10 configuration for higher volume depth, warmth and shimmer, with less of the boom associated with 4x12 cabinets.
Celestion are renowned for high quality loudspeakers, used on stage and in clubs, theaters and other venues the world over. From early radio loudspeakers to complex sound reinforcement systems, Celestion speakers have helped to shape the history of sound reproduction.
Since the company's birth in 1924, Celestion has paid meticulous attention to every product detail, combining innovative ideas with skillful craftsmanship.
Today, Celestion continues to manufacture loudspeakers and components for many different applications. Incorporating both modern and traditional technology, the company incorporates years of experience into advancing the future of loudspeaker design with great success.
- Nominal diameter: 10", 254mm
- Power Rating: 40W
- Nominal impedance: 8 and 15 Ohms
- Sensitivity: 98dB
- Chassis type: Pressed steel
- Voice coil diameter: 1.75", 44.5mm
- Voice coil material: Round copper
- Magnet type: Alnico
- Frequency range: 80-6000Hz
- Resonance frequency, Fs: 80Hz
- DC resistance, Re: 8 and 15 Ohms
- Diameter: 10.0"
- Overall depth: 5.3"
- Magnet structure diameter: 4.7"
- Cut-out diameter: 9.0"
- Mounting slot dimensions: 0.25"
- Number of mounting slots: 8
- Mounting slot PCD: 9.6"