• Automatic Frequency Selection
• Automatic Transmitter Setup
• 960 Selectable frequencies across 24 MHz bandwidth
• Detachable 1/4 wave antennas
• Microprocessor-controlled diversity
• RF presence LED
• 5-segment audio meter
• Multi-function, backlit LCD
• Low battery indicator
• Frequency and power lockout
• Rugged metal chassis
• Volume control on rear of unit
• 1/2 rack design
• Furnished rack hardware
• Non-slip bumpers for use out of rack
• XLR and 1/4" outputs

• General
• Frequency Range and Transmitter Output Level
• Band, Range, Transmitter output
• H5: 518 542 Mhz, 30 mW
• J3: 572 596 Mhz, 30 mW
• L4: 638 662 Mhz, 30 mW
• P4: 702 726 Mhz, 30 mW
• R13: 794-806 Mhz, 20 mW
• R5: 800 820 MHz 20, mW
• S6: 838 865 MHz 10, mW
• JB: 806 810 MHz 10, mW
• Q4: 740 752 MHz 10, mW
  
  User guideNOTE: This Radio apparatus may be capable of operating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies for wireless micropho
• Audio Frequency Response (+/ 2dB): Minimum 45 Hz, Maximum 15 kHz
• (Overall system frequency depends on microphone element.)
• Total Harmonic Distortion (ref. +/ 38kHz deviation, 1kHz tone): 0.5%, typical
• Dynamic Range: >100dB A-weighted
• Operating Temperature Range: 18°C (0°F) to +57°C (+135°F) note: battery characteristics may limit this range
• Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch ou
• Audio Input Level: +2 dBV maximum at -10dB position , -8 dBV maximum at 0dB position
• Gain Adjustment Range: 10dB
• RF Transmitter Output: 30 mW maximum (dependent on applicable country
• regulations)
• Dimensions (including SM58 cartridge). 254mm x 51mm dia. (10" x 2")
• Weight: 290grams (10.2oz.) without batteries
• Housing: Molded PC/ABS handle and battery cup
• Power Requirements: 2 "AA" size alkaline or rechargeable batteries
• Battery Life : >8hours (alkaline)
  
  SLX4 Receiver
• Audio Output Level (ref. +/ 38kHz deviation with 1 kHz tone): XLR connector (into 600 Ohms load): 13dBV, 1/4inch connector (into 3000 Ohms load): 2dBV
• Output Impedance: XLR connector: 200 Ohms, 1/4inch connector: 1k Ohms
• XLR output: impedance balanced pin 1: ground (cable shield), pin 2: audio, pin 3: no audio
• Sensitivity: 105dBm for 12dBSINAD, typical
• Image Rejection: >70dB, typical
• Power Requirements: 12 18Vdc at 150mA, supplied by external power
• supply
• Dimensions: 42mmH x 197mmW x 134mmD (1.65 x 7.76 x
• 5.28in.)
• Weight: 816g (1lb. 13oz.)
• Housing: Galvanized steel

Price Guarantee