• Power levels matched to the most popular speakers used by entertainers
• Optimized for maximum real-world headroom into 4 and 8 speaker systems
• Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
• Outputs: Speakon® combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems.
• Minimum depth chassis (10.1"/257 mm) fits in compact, inexpensive effects racks
• Lightweight — less than 26 lbs (12.5 kg)
• Detented gain controls for precise setting and matching of sensitivity
• GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
• Front panel LEDs monitor Power, Signal and Clipping
• Subwoofer/Satellite crossover built-in

• Power Rating:
• 8 / both channels driven / 1 kHz: 300 W
• 8 / single channel driven / 1 kHz: 350 W
• 4 / both channels driven / 1 kHz; 425 W
• 4 / single channel driven / 1 kHz; 500 W
• 2 / both channels driven / 1 kHz; 200 W
  
  Distortion (typical): 20 Hz - 20 kHz: 1 dB below rated power 8 : less than 0.05% / 4 : less than 0.1%
• Signal to Noise: (20 Hz - 20 kHz) 100 dB
• Input Sensitivity: 1.2 Vrms
• Voltage Gain: (8 ) 32.2 dB
• Output Circuitry: Class B
• Power Requirements: (1/8 power, pink noise at 4 , 120 V) 6.3A
• Frequency Response: 20 Hz - 20 kHz, +0, 1 dB
• Dynamic Headroom (4 ): 2 dB
• Damping Factor: 100
• Input Impedance ( ): Greater than 20k (balanced)
• Maximum Input Level: +24 dB (16 Vrms)
• Input Connectors (each channel): 3-pin XLR and 1/4" TRS, balanced, parallel Phono, unbalanced
• Output Connectors (each channel) Speakon®, 1/4", Binding Posts
• Amplifier and Load Protection: Short circuit, open circuit, thermal, RF protection
• Load protected against DC faults
• Front Panel Controls and Indicators: Gain controls, 21 detents
• Red Clip LEDs, proportional, 0.1% THD threshold
• Green Signal LEDs, threshold -35 dB
• Blue Power LED, AC on
• Rear Panel Controls: Full Range / Crossover switch
• 100 Hz, 3rd order LP (sub), 2nd order HP (top)
• Dimensions (HWD): 3.5" (2RU) x 19" x 10.1" (89 mm x 483 mm x 257 mm)
• Weight: Shipping / Net 30 (13.5 kg) / 25 lbs (11.5 kg) Agency Approvals: UL, CE, RoHS/WEEE compliant

Price Guarantee