• Volume controls
• Parallel balanced XLR and 1/4" TRS inputs
• Stereo (dual channel), parallel-input, or bridged mono operating modes with selector switch
• Binding post (banana plug) outputs
• 3 variable-speed fans for cooling
• Soft-start turn on, noise-free on-off
• Built-in DC offset
• Independent DC and thermal overload protection on each channel
• Short-circuit and speaker protection
• Built-in current limiter
• Power ON and Protect LEDs
• Signal and Clipping LED indicators for each channel
• Switching power supply for most reliable operation and lightweight portability
• Roadworthy, rugged double rackspace (2U) housing
• ~115V(60Hz)/~230V(50Hz) AC select switch and IEC power cord connector with built-in fuse
• 2x150W @ 4 ohms, bridged mono: 300W @ 8 ohms (2 ohms and 4 ohms bridged not recommended)

• 120W RMS @ 8 ohms per side
• (EIA 1kHz 1% THD) 150W RMS @ 4 ohms per side
• 300W RMS @ 8 ohms bridged
• Minimum 4 ohms per side, 8 ohms bridged
• Input Sensitivity: 500V RMS (-4dBu)
• Input Impedance: 50kOhm Unbalanced & Balanced
• Frequency Response (at 10dB below rated output power): 20Hz~20kHz ±1dB, 5Hz~50kHz ±3dB
• Distortion (SMPTE-1M): <.1%
• S/N Ratio: 100dB
• Protections: Full short circuit, open circuit, thermal, ultrasonic, and RF protection; stable into reactive or mismatched loads; ON/OFF muting; current limiter
• Front Panel: Power switch, input level control for each channel
• Rear Panel: Parallel/Mono/Bridge selector, AC voltage selector switch
• Connectors: Power; IEC power cord jack; Input: Active balanced XLR and 1/4" (6.3mm) TRS; Output: Touch-proof binding posts
• Voltage selectable power supply: 110V~120V or 220V~240V AC 50/60Hz
• Fuse: 115V AC ~ 6A 250V FB; 230V AC ~ 3A 250V FB
• Dimensions: 19" x 12-2/5" x 3-1/2" (483 x 315 x 89 mm)
• Weight: 13 lbs. (5.9kg)

Price Guarantee