Home > Guitar > Guitar Amplifiers and Effects > Guitar Amplifiers > Amp Stacks > Marshall Vintage Modern 2266, 425A and 425B Full Stack
Marshall Vintage Modern 2266, 425A and 425B Full Stack (KIT482821)
Item# 482821

Marshall Vintage Modern 2266, 425A and 425B Full Stack

0 Customer Reviews Write a Review
Save $1,551.00 (33%), List $4,680.00
$3,129.00
As low as $105.00 a month!
Limited Mail-In Rebate Offer


Download Rebate
Limited Mail-In Rebate Offers
Download Rebates

Why Buy

 

Recommended Accessories

 
  • Marshall Vintage Modern 2266 Tube Amp Head
  • 50-watt valve head
  • Valve compliment: 4 x ECC83 (12AX7s) in preamp, 2 x KT66 in power amp
  • Master Volume with two Gain Controls-Detail (highs) & Body (lows)
  • Two footswitchable Dynamic Ranges Low & High
  • Mid Boost switch
  • Footswitchable Proprietary digital Plate Reverb
  • Series FX loop with level switch and bypass
  • Made in England
  • Marshall Vintage Modern 425A & 425B 4x12 Extension Speaker Cabinets
  • 100-watt cabinets
  • Loaded with Celestion G12C 25 Greenbacks
  • Mono or Stereo switchable
  • 16 ohms/4 ohms mono
  • 8 ohms stereo
  • Birch ply construction
  • "finger-locking" joints
  • Made in England

Marshall Vintage Modern 2266, 425A and 425B Full Stack
This Marshall full stack includes one 2266 amp head, one 425A angled speaker cab, and one 425B straight speaker cab.Marshall Vintage Modern 2266 Tube Amp Head This head is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance. Two frequency selective Pre-amp Volumes (Gains)-Body and Detail-facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound. A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch. Finally, a series FX loop is provided for those players who wish to use outboard effect to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required. The cosmetics are also a carefully crafted hybrid of old and new styles-made even more dramatic by the deep purple vinyl that covers the entire series.Marshall Vintage Modern 425A & 425B 4x12 Extension Speaker Cabinets These cabinets are traditional Marshall 4 x 12 speaker cabs in design. These cabs are mono/stereo switchable and are loaded with G12C 25 Watt Celestion Greenbacks. These were specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre that complements vintage tone and the Vintage Modern Series perfectly. The cosmetics are also a carefully crafted hybrid of old and new styles-made even more dramatic by the deep purple vinyl that covers the entire series.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

  • Marshall Vintage Modern 2266 Tube Amp Head
  • Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230mm)
  • Weight: 39.6 lbs. (18 kg)

    Marshall Vintage Modern 425A & 425B 4x12 Extension Speaker Cabinets
  • Dimensions: 30.5" x 30" x 14.5" (770 x 755 x 365mm)
  • 425A weight: 79 lbs. (36 kg)
  • 425B weight: 81.5 lbs. (37 kg)

Product Specific Resources
Product Specific Resources
Marshall Vintage Modern Amps

Related Media
Related Media
Eric Johnson Interview - Final Segment

5 year parts/ 3 year labor warranty.
  Get off the couch and write a review!

Price Guarantee

Seen a lower price for the Marshall Vintage Modern 2266, 425A and 425B Full Stack? Fill out this form and we'll BEAT IT*.
(US Currency)      
 
   

* Price guarantee valid on all new in-stock merchandise sold by an authorized U.S. Dealer. Guarantee does not apply to discontinued, blemished, damaged, closeout, open box, refurbished or auction items.

HACKER SAFE certified sites prevent over 99% of hacker crime.