|
Furman PL-Plus II Power Conditioner with Voltmeter
PL PLUS SERIES II
The PL Series II feature LED rack lights which produce virually no heat and provide an extemely long life span (up to 10,000 hours). A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off. Additionally, a rear mounted BNC jack accepts any standard goose neck lamp for rear rack illumination.
The PL Series II has a master switch for the rear outlets that glows red when the power is on. The front-panel circuit breaker can be quickly and easily reset should the unit be overloaded. The PL Series II also features a 10 foot,14 gauge heavy-duty power cable.
Model PL-PLUS Series II is an enhanced version of the PL-8 Series II, offering a 20 segment LED bar-graph meter that displays incomming voltage between 90 and 128 volts in 2-volt steps. The normal range voltages are indicated in green, with moderately and extremely high or low voltages in yellow and red respectively. The voltmeter's accuracy is ±2 volts. It can easily be recalibrated if necessary.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Dimensions: 1-3/4"H x 19"W x 10-1/2"D
- Weight: 11 lbs. (5 kg)
- Construction: Steel chassis, .125" brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
- Current rating: 15 amps
- Operating Voltage: 90 to 140 VAC
- Over Voltage Shutdown: 140 VAC typically
- Voltmeter Accuracy: PL-PLUS II only: ±2 VAC, calibrated with internal trimpot adjustments
- Spike Protection Modes: Line to neutral, zero ground leakage
- Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps, 133 VAC RMS (tested to UL-1449 and USA/CIDA A-1-1, 6,000 VAC @ 3,000 Amps)
- Response time: 1 nanosecond
- Maximum surge current: 6,500 amps
- Noise attenuation: 10dB @ 10kHz, 40dB @ 100kHz, 100dB @ 10MHz Linear attenuation curve from 0.05 - 100 Ohms line impedance
- Power consumption: 11W
- Safety Agency Listings: CE, NRTL-C
|
