|
Furman PL-8 II Power Conditioner
PL8 SERIES II
The PL Series II feature LED rack lights which produce virually no heat and provide an extemely long life span (up to 10,000 hours). A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off. Additionally, a rear mounted BNC jack accepts any standard goose neck lamp for rear rack illumination.
The PL Series II has a master switch for the rear outlets that glows red when the power is on. The front-panel circuit breaker can be quickly and easily reset should the unit be overloaded. The PL Series II also features a 10 foot,14 gauge heavy-duty power cable.
Model PL-PLUS Series II is an enhanced version of the PL-8 Series II, offering a 20 segment LED bar-graph meter that displays incomming voltage between 90 and 128 volts in 2-volt steps. The normal range voltages are indicated in green, with moderately and extremely high or low voltages in yellow and red respectively. The voltmeter's accuracy is ±2 volts. It can easily be recalibrated if necessary.
Better safe than sorry. Order today.
- Dimensions: 1.75" H x 19" W x 10.5" D
- Weight: 11 lbs. (5 kg)
- Construction: Steel chassis, .125" brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
- Current rating: 15 amps
- Operating Voltage: 90 to 140 VAC
- Over Voltage Shutdown: 140 VAC typically
- Voltmeter Accuracy: PL-PLUS II only: ±2 VAC, calibrated with internal trimpot adjustments
- Spike Protection Modes: Line to neutral, zero ground leakage
- Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps, 133 VAC RMS (tested to UL-1449 and USA/CIDA A-1-1, 6,000 VAC @ 3,000 Amps)
- Response time: 1 nanosecond
- Maximum surge current: 6,500 amps
- Noise attenuation: 10dB @ 10kHz, 40dB @ 100kHz, 100dB @ 10MHz Linear attenuation curve
- from 0.05-100 Ohms line impedance
- Power consumption: 6W
- Safety Agency Listings: CE, NRTL-C
|
