• Tube Driver circuit for effect devices, also serves as a separate fifth channel that can be selected directly (with or without EQ) in reciprocation with the four channels
• Modern and Classic sound-shaping buttons determine the basic voicing of all four channels, giving you a broader, deeper tonal spectrum to work with
• Two Gain variants for each of the basic channels: Gain Boost and Hi Gain let you have to different gain settings for every channel
• Three voicing sections: one EQ for Clean and Crunch (Main Channel 1), one for Lead I and Lead II (Main Channel 2) and another for the Tube Driver. Every channel sports a dedicated Treble knob
• Various sound-shaping buttons tuned to match the tonal requirements of the given channels: Bright and Ultra Bright for Clean and Crunch, Contour and Mid Edge for the two Lead channels
• Large spring reverb for very natural-sounding reverb, with separate knobs for the two Main Channels
• Three effect loops: FX Loop I and FX Loop II are variable, switchable effect loops, while Serial FX Loop is a separate circuit that can be used in series with two main effect loops. Each effect loop may be activated for each channel as well as for the Tub
• Two each power amp Master and Presence knobs, accessible via MIDI. The amp can also be muted via MIDI controller 7
• Variable, MIDI-switchable power amp output (50 or 100 watts) with hot impedance adjustment (that is, on the fly)
• A/B speaker switching with separate impedance selector for connected speaker systems
• Balanced, frequency-compensated XLR line output for routing preamp or power amp signals to mixers or recording gear
• MIDI In and Thru ports serve to integrate the amp into a MIDI system
• 128 MIDI presents, accessible via 16 MIDI channels
• Offers three different remote interface ports: Serial Amp Control Port accepts the Custom Z-9 Footswitch (sold separately); MIDI In accepts the Z-9 for use as a simple MIDI footcontroller or any other MIDI footcontroller; amp is equipped with a stereo jac
• Programmable Noise Gate for suppressing noise in the Crunch, Lead I and Lead II channels

• Output power: approx. 100 watts in Hi Power mode, approx. 50 watts in Lo Power mode adjusted accordingly to 4, 8 and 16 ohms, adjusted accordingly to 4, 8 and 16 ohms
  
  Input sensitivity
• Input: from -20 dB, nominal, max. 0 dB
• Effect Return: from -20 dB nominal, max. 0 dB
  
  Output level
• SEND, level range: from -20 dB to approx. 0 dB max.
• Frequ.Comp. Line Out: +6 dB max.
  
  Power consumption: approx. 390 watts max., equipped with 6L6GC power tubes
  
  Fuses
• external at 230/240 mains voltage: 2 ATL (2 amps slo-blo)
• External at 100/115/120 mains voltage: 4 ATL (4 amps slo-blo)
• Internal: 2 x 2.5 ATL (2 amps slo-blo)
  
  Tubes
• V1, V2, V3, V4: 6L6GC (factory loaded) or EL34, matched sets
• V5: ECC83 FQ, input tube
• V6, V7: ECC83 selected
• V8, V9: ECC83 standard
  
  Logic control system: AT89C52 microcontroller with internal 8K Flash Memory for Processor
• Software: software source code; Upgradeable with external Programmer
• Memory: EEPROM 93C66 for data retention
  
  System interfaces
• MIDI: Asynchronous data protocol according to the MIDI standard, MIDI program changes 0 127, MIDI channels 1 16, MIDI controller 7 (main volume), value 0-5 = Master Volume Mute, Mute, value > 5 = default, Master Volume level
  
  Serial Amp Control: Pro
• Dimensions: 71 x 28 x 29 cm
• Weight: 26 kg

Price Guarantee