An all around general replacement or upgrade 10" Speaker for Guitar Amps. Lots of Punch and Crunch! Rated for up to 75 Watts (RMS) of Power. (7 Year Limited Warranty)
- Voice Coil Diameter: 1.5", 38.1mm
- Magnet Weight: 16 oz.
- Power Rating.: 75W
- Sensitivity: 98.7
Eminence Legend 1058 10 Guitar Speaker
LEGEND 105 GUITAR RAW FRAME DRIVER:
OVERVIEW:
Eminence Guitar Legends are specially designed for electric guitar amplifiers. Tuned by skilled ears, these hand-built specials feature a range of materials and ideas from nearly 40 years experience. Models such as the LEGEND B15, 121 and Modeling 12 are state of the art designs which meet the modern-day demand for power handling while other models feature vintage magnet and cone materials to recreate the traditional sounds of lead and jazz guitar.
The most difficult aspect of presenting a guitar speaker to the world is being able to describe its tonal characteristics. Your choice of guitar speakers is at least as important as your choice of pickups or strings. Just as you customize a guitar to suit your sound, so too can you customize - or 'hot rod' - your combo with Eminence loudspeakers.
Eminence is fortunate to have one of the foremost authorities on guitar and amplifier tone in the music industry as an endorsing artist. Greg Martin, lead guitarist for the Kentucky Headhunters was kind enough to lend his ears and hands in an effort to present to you the most realistic and accurate tonal descriptions for each of the Eminence Guitar Legends.
APPLICATIONS:
Country, BLUES, Rockabilly: This Speaker works Well With Rickenbacker Guitars, Or A Super Reverb. Recording Studios & 4x10 Inch Cabinets For Live Gigs.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Nominal Basket Diameter: 10", 254mm
- Nominal Impedance: 8 ohms
- Power Rating*: 75W
- Resonance: 97Hz
- Usable Frequency Range: 100Hz-6kHz
- Sensitivity**: 98.7
- Magnet Weight: 16 oz.
Thiele & Small Parameters - Resonant Frequency (fs): 97Hz
- DC Resistance (Re): 7.49
- Coil Inductance (Le): 0.56mH
- Mechanical Q (Qms): 17.78
- Electromagnetic Q (Qes): 1.21
- Total Q (Qts): 1.13
- Compliance Equivalent Volume (Vas): 26.4 liters / 0.9 cu. ft.
- Peak Diaphragm Displacement Volume (Vd): 0cc
- Mechanical Compliance of Suspension (Cms): 0.16mm/N
- BL Product (BL): 8.0 T-M
- Diaphragm Mass inc. Airload (Mms): 17 grams
- Efficiency Bandwidth Product (EBP): 80
- Maximum Linear Excursion (Xmax): 0.0mm
- Surface Area of Cone (Sd): 344.9 cm2
Mounting Information - Recommended Enclosure Volume:
- Sealed: Acceptable
- Vented: Acceptable
- Overall Diameter: 10.11", 256.8mm
- Baffle Hole Diameter: 9.13", 231.8mm
- Front Sealing Gasket: fitted as standard
- Rear Sealing Gasket: fitted as standard
- Mounting Holes Diameter: 0.23", 5.7mm
- Mounting Holes B.C.D.: 9.6", 243.8mm
- Depth: 4.1", 104mm
- Net Weight: 4.4 lbs., 2 kg
- Shipping Weight: 5.4 lbs., 2.5 kg
Materials of Construction - Copper voice coil
- Polyimide former
- Ferrite magnet
- Non-vented core
- Pressed steel basket
- Paper Cone
- Paper cone edge
- Solid composition felt dust cap
* Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment. - **The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms.
- Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance - LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with
- fiberglass on all six surfaces (three with custom-made wedges)
Price Guarantee
Seen a lower price for the
Eminence Legend 1058 10 Guitar Speaker? Fill out this form and we'll BEAT IT*.
