Aviom Advanced Personal Monitoring System
The Aviom Advanced System includes six Aviom A-16II Personal Mixers, one Axiom AN-16/i 16-Channel Input Module, one Axiom A-16D Pro A-Net Distributor/DC Power Source, six Aviom MT-1 Mic Stand Mounts, and one L-100 Layflat Cat-5e 100 ft. Cable. The Aviom Pro16 Series defines the industry standard for Personal Monitor Mixing and streaming audio over Cat-5. Pro16 Series products deliver perfect monitor mixes and economical digital audio distribution.A-16II Personal Mixer The Aviom A-16II Personal Mixer allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A-16II Personal Mixer is a 16-channel digital mixer which gives each performer completely independent control over channel volume, grouping, pan, and stereo spread, as well as master volume and tone. Every performer gets a completely customized monitor or cue mix. Each user can save and recall up to sixteen custom mixes as presets in their Personal Mixer.The stereo output from the A-16II can be used to drive virtually any output device from wired or wireless in-ears or headphones to powered floor wedges, an amplifier, or spot monitors.Audio is taken from an existing console, using a combination of up to 16 direct outs, inserts, auxes, or groups. These sixteen channels are fed to a Pro16 Input Module, such as the AN-16/i, and are then distributed digitally to an unlimited number of Personal Mixers using Cat-5e cables. Set-up is simple and quick.Personal Mixers can be daisy-chained or connected in parallel using an A-Net Distributor. Parallel connections also allow power to be supplied to the mixers over the Cat-5e cable (included). The A-16II can be mounted on a standard mic stand or music stand using the MT-1 and EB-1 mounting accessories.AN-16/i 16-Channel Input Module The Aviom AN-16/i converts 16 balanced line-level analog audio channels into uncompressed, full bandwidth 24-bit digital audio transmitted via A-Net. Placed at a front-of-house or monitor console, the AN-16/i can be used as a head-end for a Pro16 Monitor Mixing System. Used in conjunction with the AN-16/o Output Module, the AN-16/i can also be used in a digital snake as an input path for main return signals from front-of-house.The AN-16/i provides 16 balanced line-level inputs into a Pro16 system. Audio is converted to digital (48kHz, 24 bits, no compression) and transmitted in real time via A-Net, up to 500 feet over a Cat-5e cable. A dedicated audio thru is available for each input channel, allowing the AN-16/i to be seamlessly inserted into an existing audio signal path.In most uses, audio from a console any combination of channel inserts, direct outs, submixes, auxes, or groups is connected to the input channels on the AN-16/i. The A-Net Out on the AN-16/i is connected to the A-Net In of a Pro16 Personal Mixer (such as the A-16II) or an A-Net Distributor.The built-in A-Net Expansion jack allows two 16-channel A-Net streams to be combined onto a single cable (32x0 or 16x16), and the AN-16SBR System Bridge can be used to combine up to four 16-channel streams onto a single cable in a variety of bi-directional configurations up to 32x32, 48x16, or 64x0.A-16D Pro A-Net Distributor/DC Power Source The Aviom A-16D Pro accepts one Pro16 A-Net input signal (typically from an Input Module, such as the AN-16/i) and provides nine parallel outputs, using rugged EtherCon connectors and standard Cat-5e cables. The A-16D Pro provides isolated (floating ground) DC power through the eight A-Net Outs the ninth output is an unpowered A-Net Thru connector, designed for distributing a copy of the A-Net signal to a second A-Net Distributor or remote location.The A-16D Pro eliminates the need to daisy chain Personal Mixers, and simplifies set-up by eliminating the need to connect a power supply to each mixer. Inside the A-16D Pro is Aviom's unique power sub-system design, which requires no external power supplies and which virtually eliminates the possibility of introducing hum or ground loops. The A-16D Pro can also be used as a central hub in an audio distribution system or snake, providing outputs to multiple locations or redundant outputs to a single location.All connections on the A-16D Pro are on the front panel. A pass-through cable cutout is provided for flexible cable routing. As with all Pro16 Series products, Cat-5e cable runs can be up to 500 ft.MT-1 Mic Stand Mount The Aviom MT-1 allows the Aviom A-16II Personal mixer or A-16CS Control Surface to be mounted on a standard microphone stand. The MT-1 attaches with three screws to the bottom of an A-16II or A-16CS and mounts on any standard mic stand. With an optional right-angle extension bracket (EB-1), you can mount the mixer or control surface on an existing mic or music stand.Aviom L-100 Layflat Cat-5e 100' Cable The premium quality Cat-5e cable features standard RJ45 connectors with protective rubber jackets. (One 30' Cat-5e cable ships with each A-16II Personal Mixer).