- Clear sound quality and rock-solid dependable performance
- Automatic frequency scanning finds an open channel at the touch of a button
- All 10 user-switchable channels are compatible —for easy use with multiple systems; no confusing frequency groups
- True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
- Tone Lock tone squelch system fights interference
- Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
- Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
- Includes rack-mount kit and detachable UHF antennas
- Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
Audio-Technica ATW-2192 Wireless System
The Audio-Technica ATW-2192 Wireless System includes:
ATW-R2100 receiver, ATW-T210 UniPak Transmitter, BP892cW Omnidirectional Condenser Headworn Microphone, element covers, windscreens, and clothing clip.
Audio-Technica's innovative 2000 Series wireless delivers professional performance, unheard of in its class. With this breakthrough series, Audio-Technica makes easy setup, automatic scanning and other advanced wireless features affordable as never before.
Automatic frequency scanning - standard on all 2000 Series wireless receivers - finds and sets the best available channel at the touch of a button. For those using multiple wireless systems simultaneously, the 2000 Series offers another ease-of-use standout: any of its 10 channels may be used together - eliminating confusing frequency groups and other frequency-coordination problems.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Overall System Specifications
- Operating Frequency: UHF band, 656.125 to 678.500 Mhz
- Number of Channels: 10 total
- Frequency Stability: +/-0.005%, phase lock loop frequency control
- Modulation Mode: FM
- Normal Deviation: +/-5kHz
- Operating Range: 300' typical
- Frequency Response: 100Hz to 15kHz
- ATW-R2100 Receiver Specifications
- Receiving System: Dual independent receivers, automatic-switching diversity
- Image Rejection: 55 dB nominal, 50 dB minimum
- Signal-to-Noise Ratio: >100dB at 40kHz deviation (A-weighted), maximum modulation 40kHz
- Total Harmonic Distortion: <1% (+/-10kHz deviation at 1kHz)
- Sensitivity: 20dBuV (S/N 60dB at 5kHz deviation, IEC-weighted)
- Intermediate Frequency: 65.75 MHz, 10.7 MHz
- Audio Output (AF Level set at "0"): Unbalanced: 25 mV (at 1kHz, +/-5kHz deviation, 100k ohm load); Balanced: 12.5 mV (at 1kHz, +/-5kHz deviation, 100k ohm load)
- Output Connectors: Unbalanced: 1/4" phone jack; Balanced: XLRM-type
- Power Supply: 120V AC 60Hz, or 12-18V DC, 350 mA, with external supply
- Dimensions (W x H x D): 8.27" x 1.73" x 6.39"
- Weight: 2.2 lbs
- Accessories Included: Two flexible UHF antennas, rack-mount adapters, ACadapter
- ATW-T210 UniPak Transmitter Specifications
- RF Power Output: 12mW
- Spurious Emissions: Under federal regulations
- Input Connections: High impedance, low impedance, bias
- Batteries (not included): Two 1.5V AA alkaline
- Current Consumption: 150 mA typical
- Battery Life: Approximately 9 hours (depending on battery type and use pattern)
- Dimensions (W x H x D): 2.60" x 3.63" x 0.89"
- Net Weight (without batteries): 2.82 oz
Price Guarantee
Seen a lower price for the
Audio-Technica ATW-2192 Wireless System? Fill out this form and we'll BEAT IT*.
