Applied Microphone Technology AMT TA2 Studio Clip-On Double Microphone System
The microphone attaches to the bell of instrument, the top or over the keys microphone is suspended in a 4 point isolation ring reducing valve, key, click, and handling noise. The second microphone is placed in front of the bell of the microphone. Both microphones are on goosenecks for optimal placement. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.

The AP40 Preamp converts all of the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a specific frequency curve. The curve is necessary on certain models or musical instruments in order to maintain the most natural reproduction of sound in conjunction with achieving the most amount of gain before feedback in a live application.

There is a L / G switch on the preamp. This is a Ground Lift switch. If phantom power is not regulated for the correct voltage OR if phantom is reduced by the addition / amount of other condenser microphone connected, the switch disconnects the phantom power and allows it's own battery supply to power the preamp. If the switch is moved to the L position, the preamp is powered by the battery. If the switch is in the G position, phantom will power the preamp. The output of the preamp is an XLR Low Impedance balanced output.

Applied Microphone Technology AMT TA2 Studio Clip-On Double Microphone System Specifications:

Element: Condenser
Polar Pattern: Cardioid
Frequency: 50Hz - 18kHz
Sensitivity: -65dB+ 4dB
Impedance: 150 Ohms
Phantom Power: 12 to 52 vDC, self-powered battery
Max input SPL: 120 dB
Dimension: 3.5" Flex Arm
Cable: 6'
Weight (Mic only): 36 grams

Applied Microphone Technology AMT TA2 Studio Clip-On Double Microphone System Features:

AMT TA2 Double Microphone
AMT AP40 Preamp
1/4 to XLR Cable
Hard shell Blo-mold protective case

Save BIG when you buy today!