AER Basic Performer Acoustic Guitar Combo Amp
The Basic Performer Acoustic Guitar Amp with its specially designed construction and its 4 x 60 watt power is an ideal tool for acoustic and electric bass-amplification. More than that, it suits very well for all instruments with strength in the low register, e.g.: cello, harp etc. Apart from its two channels with three-band tone- control and mute-switch it offers a compressor and a notch filter.
Long scale lengths, huge body sizes, and resonance problems are only some trouble zones of the acoustic instrument. The small twin-cone system is perfect - it is fast, provides a superior coverage for the critical mid-range and has got enough substance in the bass range. The AER Basic Performer has four 8"-twin-cone speakers which are individually powered by four 60W power amps provide for the required surface area and the necessary sound pressure level.
The special AER band-pass / bass-reflex cabinet design supports the reproduction of even the lowest frequencies with definition. Hi-end preamps, proper filters and additional professional sound design make the Basic Performer amplifier a multitalented all-round solution.
The sound characteristics of this AER amp are full range, open and light - breathing as well as grumbling and surprisingly appropriate for far more instruments than the bass-related instruments such as harp, cello, accordion or even try a jazz guitar.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Inputs: Ch 1:
- Line: unbalanced, 1 MEG
- Mic: balanced, 600 Ohm
- Ch 2:
- Line: unbalanced, 1 MEG
- Mic: balanced, 600 Ohm
- Eff.Return: -10dBV/10k
- Tape-In: -10dBV/10k
- Outputs: Tuner: -10dBV
- Line: 0dBV
- DI: -20dBV
- Send: -10dBV
- Phones: stereo, 300 mV / 32 Oh
Footswitch Effect External effect = Tip, ground = Sleeve - Footswitch Mute: Ch 1 = Tip, Ch 2 = Ring
- Footswitch Master: Solo = Tip, Ensemble = Ring
- EQ: Channel 1:
- Bass: ñ18 dB/ 100 Hz
- Middle: ñ13 dB/ 550 Hz
- Treble: ñ11 dB/ 10 kHz
- Channel 2:
- Bass: ñ10 dB/ 80 Hz
- Middle: ñ10 dB/ 200 Hz - 1kHz
- Treble: ñ10 dB/ 10 kHz
- Colour: - 3 dBV/ 700 Hz and + 10 dBV/ 10kHz
Analog Signal - Processor: Limiter, Subsonic Filter und
- Enhancer
- Power Amp: Powerconsumption: 220-240 V / 50-60Hz / 300 VA (110V / 50-60Hz)
- Rating: 200 Watt / 4 ohm rms
- Mains Fuse: 3.1 A slow
- Speaker: 4 x 8' twin-cone speaker system (98 dB 1w/1m, freq. range
- 60 Hz - 18 kHz)
- Cabinet: 0.59' 3(15 mm) birch plywood
- Dimension: 20.87' (530 mm) high, 14.17' (360 mm) wide, 15.75' (400 mm) deep
- Finish: waterbased acrylic, black spatter finish
- Weight: 50.72 (23 kg)
- 0dB/V ~ 1V
- Specifications and appearance subject to change without notice
